|September 25, 2006|
|Olympus Corporation (President: Tsuyoshi Kikukawa) is pleased to announce the development of a three-dimensional compression molding process for wooden materials. The new process draws extensively on Olympus expertise in precision metal-forming technologies. The processed wooden material has the feel and grain pattern of natural wood, but is much harder than engineering plastics such as ABS and polycarbonate resins*. Strong enough to be used to create the outer casings of electronic products, the material can enhance the aesthetic value and pleasure of ownership that those products provide.|
|The efficiency, convenience, and lower costs associated with mass production technologies have inundated us in a sea of products. But at the same time, there has been a decline in the aesthetic satisfaction that many of those products provide. So we stepped back to consider what we could do to increase the aesthetic satisfaction that products provide.
One answer was to use wood, the natural color, patina, and grain of which are almost universally appreciated as things of beauty.
We therefore focused on the idea of using a three-dimensional compression molding process to produce a wood-based material thin enough and hard enough to be used to make the casings for electronic products.
With the successful development of this process, it is our hope that consumers will enjoy greater aesthetic satisfaction and a sense of personal attachment with future products that are made from this new wood material.
|Details of the New Technology|
|Hardness that exceeds engineering-grade resins at a thickness that can be used to produce casings for electronic products
Using the newly developed three-dimensional compression molding process, the specific gravity of a piece of cypress wood was increased from approximately 0.4~0.5 to more than 1 (approximately 2.5x compression). The resulting material is thin enough to be used as a casing material for electronic products, yet is much harder than the ABS and polycarbonate resin-based engineering plastics that are normally used to produce such casings.
It is this special three-dimensional compression molding technology that enables the material to be used to make electronic product casings.
The feel and grain pattern of wood, with an attractive natural patina
Proprietary Olympus molding technologies developed for the production of digital camera, microscope, and endoscope lenses are used to form the wood material into the desired shape. The application of these high-precision molding technologies to wood compression molding results in an attractive natural patina that significantly reduces the need to post-process the material.
|Parts of production process and prototype example of new material applied
to the production of a camera
|An example of a camera case created using this new technology will be exhibited at the Olympus stand (located in hall 2.2, booth B 030/040) during photokina 2006 in Cologne, Germany, September 26 ~ October 1.|
- Press releases are company announcements that are directed at the news media.
- Information posted on this site is current and accurate only at the time of their original publication date, and may now be outdated or inaccurate.
- Company names and product names specified are trademarks of their respective owners.